Rule Configuration
Last updated
Last updated
The platform supports the configuration of event rules in the form of custom or template, and supports multiple linkage methods such as SMS, email, and video.
Steps
1. Click the inverted triangle in the upper right corner of the business menu → system management → event center → rule configuration → add from the template.
2. In the rule list, click Add to add a new rule.
3. The default is "Add from the template", select a specific template in the template list, and the details of the template will be displayed on the right.
4. Fill in the specific content according to the format of the template on the right.
5. Required basic parameters: rule name, select time template, specify event source, mark alarm level.
6. Non- mandatory parameters: description information, whether to enable rules, alarm linkage information.
1. Select Time Template: Alarms that occur within the set time period are reported to the platform.
2. Select Specific Event Source: the channel where the alarm occurred and the event type of the alarm.
3. Simultaneous occurrence in a few seconds: When multiple event sources are specified, all event sources must trigger alarms within the specified time before they can be reported to the platform.
4. Alarm linkage information:
The client pops up the real-time preview of the specified channel: the client pops up the real-time video of the set video resource point.
The client pops up the video playback of the specified channel: the video playback of the video resource point is popped up on the client side.
The client pops up the superimposed event information of the video screen: the client previews the superimposed alarm event information content of the pop-up video screen in real time.
The client controls the voice intercom of the specified intercom channel: the client can perform voice intercom with the set channel in the alarm pop -up box of the client.
Prompt sound played by the client: When an alarm event occurs, the client sends out an alarm sound.
Client voice broadcast event information: When an alarm event occurs, the client will voice broadcast the source of the event.
Video recording Specified channel event recording: When an event occurs, the central storage recording of the designated channel will be marked as alarm recording.
Specified channel snapshot: When an event occurs, the specified channel will take an alarm snapshot.
Control the PTZ to call the preset point of the specified channel: when the event occurs, the video event of the linkage dome camera will start to rotate to the specified preset point;
Control the PTZ to call the patrol path of the specified channel: when an event occurs, the linked dome camera video will enable the set patrol path.
Send SMS to user: When an event occurs, the linked SMS server will send a SMS to the specified user or person.
Send mail to user: When an event occurs, the linked mail server will send mail to the specified user.
Send a message to the user: When an event occurs, send an alarm message to the specified user.
Steps
1. Click the inverted triangle in the upper right corner of the business menu → System Management → Event Center → Rule Configuration → Add from Custom.
2. In the rule list, click Add to add a new rule.
3. Required basic parameters: rule name, select time template, mark event level.
4. Non- mandatory parameters: description information, whether to enable rules, alarm linkage information.
5. Click the " OK " button.
Steps
1. Click the inverted triangle in the upper right corner of the business menu → system management → event center → rule configuration.
Rule in the rule list, and click the button on the right to delete the rule.
Rule in the rule list, click the button on the right to enter the rule modification interface, and edit the relevant information of the rule.
2. Click the operation bar on the right side of the rule list to close the rule.
Click the operation bar on the right side of the rule list to open the rule.
